What is the connection cable manufacturer to answer your questions
A connector is a component that our electrical engineering technicians often contact. Its function is very simple: between the blocked or isolated circuits in the circuit, build a communication bridge, so that the current flows, so that the circuit to achieve the intended function. Connectors are an indispensable part of electronic equipment. If you observe the path of current flow, you will always find one or more connectors. The form and structure of connectors are ever-changing. With different application objects, frequencies, powers, and application environments, there are various forms of connectors. For example, connectors for lighting on the court and connectors for hard drives and rocket-ignition connectors are very different. But no matter what kind of connector, it is necessary to ensure that the current flows smoothly, continuously and reliably. Generally speaking, the connector is not limited to the current. In today's rapid development of optoelectronic technology, the carrier of signal transmission in optical fiber systems is light. Glass and plastic replace the wires in ordinary circuits. Connectors are also used in the pathway, and they serve the same purpose as circuit connectors. Since we only care about circuit connectors, this course will closely integrate Molex's products to focus on circuit connectors and their applications.
Imagine what would happen without a connector? At this time, the circuits should be connected permanently with continuous conductors. For example, to connect an electronic device to a power source, the two ends of the connecting wire must be fixed to the electronic device and the power source by some method (such as soldering). As a result, there are many inconveniences both in production and use. Take car batteries as an example. Assuming that the battery cable is fixedly welded to the battery, the car manufacturer increases the workload for installing the battery, increasing production time and cost. When the battery is damaged and needs to be replaced, the car must also be sent to a repair station, the old one is desoldered, and then the new one is welded. Therefore, more labor costs are required. With the connector, you can save yourself a lot of trouble. Buy a new battery from the store, disconnect the connector, remove the old battery, install the new battery, and reconnect the connector. This simple example illustrates the benefits of connectors. It makes the design and production process more convenient and flexible, reducing production and maintenance costs